恩识医疗科技(上海)有限公司

The receiver is a device for wirelessly receiving the physiological signals collected by the implant and transmitting stimulation signals to the implant. Signals emitted from different animals can be accurately received. Analog output signals can be processed by other data analysis system. The gain antenna enhances sensitivity of wirelessly receiving signals inside and outside experimental animal’s body. USB data interface module allows transmission of computer control and stimulation commands of the system. Via DAC, the receiver outputs 0-3.3V analog signals.

1. 18-channel analog data output; stimulation emission of six implants can be controlled simultaneously.

2. Working distance of wireless transmission is 4m for big animals and 2m for rat.

3. Range of analog signal output: 0-3.3V

1. Wireless receiving

2. Each receiver can simultaneously monitor dynamic physiological signals of up to 18 channels of 6 experimental animals (each animal has 3 channels).

3. When connected to computer through data switching wire, the receiver can transmit programmed stimulation command to the implant in each animal while receiving signals.

4. The receiver can alarm low battery status of the implant in order to avoid accidental interruption of experiment due to low or exhausted battery.

5. The optional remote control module allows remote monitoring of stimulation.

Different status of the indicator light reflects different working condition of the implant.

Name of customer's unit
Name of contact
Tel
E-mail
Product(s) of interest
Others

云顶集团

Message board